2011 NEW PLC CABLE NOW AVAILABLE! NEW FEATURES! MORE RELIABLE!
Power LED indicator, appearing white when in optical isolated
status and yellow when not non-isolated status.
This USB-1761-CBL-PM02 cable is a suitable replacement of USB
programming cable for Allen Bradley Micrologix.
Works with all Allen Bradley Micrologix 1000, 1100, 1200, 1400 and
1500's series PLC.
This cable simulate USB port as traditional serial port (usually
COM3), which enables existing programming software to communicate
through simulated traditional port and PLC devices. Embedded with
this cable is the necessary data conversion equipments to
communicate between PLC end to and PC USB end.
Support Rslogix500 v7.0 and above.
Support Windows 7/2000/Windows XP (WinNT4/95/98/Me/DOS NOT
Smart LED indicator. Auto identification of optical isolation
USB bus-powered, with current consumption of 50 mA
Each PC Support multiple cables
Support UART data format: Data bit: 8, stop bit: 1, 2, Parity: odd
/ even / no parity
Compatible with USB V1.1 and V2.0
Reliable performance & reasonable price
This cable support Baud rate 9.6K,19.2K, no 187.5k.
Not supported Multi-Master and advanced PPI. ( Please check
Multi-master version in our store.)
USB device drivers should be installed before using programming
cable, which are available on the CD-ROM sold together with the
cable. And for the specific installation steps, please refer to the
instruction files on the CD-ROM drivers, and details are not
necessarily listed here.
After completing Driver installation, the corresponding COM port
for the programming cable will be displayed in the Device Manager
of Window. The step next is just to choose this COM port in the
programming software and other application software and keep other
communication parameters as in the Default settings. And the
following steps are exactly the same as in the traditional
programming cables with RS232 interfaces.
Package info 1 x USB-1761-CBL-PM02 PLC Programming Cable 1 x Software CD