Self Adhesives Multi Layers Material For Sound Deadening, Vibration
Damping In 4.5 mm (177 mil) Thick
|Alumnium Color :||Silver|
|Raw Material :||1.5mm Thick Butyl; Foil; 3 mm Thick Foam Rubber|
|Butyl rubber Color :||Black|
|Foam Rubber :||Natural Black Form Rubber|
|Release Paper :||Yellow ; White ; Brown|
|Thickness :||4.5mm; 177mil|
|Size :||460 mm X 800 mm; 18”x31.5” ( Accept customerization)|
|Door Kits||4 pcs / pack ; 5 packs / Carton|
|Bulk Kits||9 / 10 pcs / Pack ; 2 packs / Carton|
|Normal Packaging||20 pcs / Carton|
ZZXY-06 Multi Layers Sound Deadening, Sound Damping Material is an enhanced material which based on aluminum foil and butyl
Structure: natural face foam rubber + aluminum foil + self adhesion
butyl rubber based + releasing liner
It mainly used for vibration damping , sound dampening on metal
sheet suface. In car interior, reduce car engine noise, wheel
noise, road noise, wind noise ,improve car audio sound quality.
Application area: door panel, firewall, under dash, floor, trunk
• Easy-to-install, very high-strength adhesive butyl rubber
• Eliminate body/floor vibration
• Better audio sound quality
• Good to160℃
• Water proof, fire proof
It can be die cut to shape and placed onto the body surface
directly on painted panels or after the sheet metal is cleaned
before painting (typically at the sealer application operation). is
used to treat metal panels, partitions, ducts, doors, bins, panels,
and so forth in railroad cars, buses, automobiles, and ships.
It is also used for ventilation ducts, relay cabinets, steel
furniture, home appliances, sink units, computer equipment, machine
tools and many other objects that suffer from vibration-produced
Others,it can be used for building construction, electronic
industry, machinery, steel furniture, home appliances noise.
Use scissors, knife or die to cut the mat to the desired size and
shape before removing the release liner. Next, remove dust, grease,
moisture, and other foreign matter from the application surface.
Peel off the release liner. The simplest application technique is
to bend the mat slightly and attach it along its shortest edge.
Press the mat firmly into place, using a roller for larger pieces.
The roller reduces the risk of leaving air pockets, which reduce
sound damping capacity. The temperature of the mat and application
surface should not be below room temperature during fitting.
Heating the material is not necessary.
Our products competitive
Improves Bass Quality and Reduces Bass Distortion
Kill unwanted noise, rattles, vibrations
Reduce exhaust and engine noise
Full car installation reduce noises 5-8 dB
Temperature range of -60 degree ~160 degree