6"inch -20"inch Ultra Thin Sintered Diamond Lapidary Notched Rim
Saw Blades With Single Directional Blades
DIAMOND LAPIDARY NOTCHED SAW BLADES
The outside rim of the blade has hundreds of thin notches filled
with diamond and will cut even the hardest rock. The depth of the
notches is 5mm.
These saw blades are steel core and are designed specifically for
cutting rocks. They will also work well for cutting ceramics. The
strength of steel gives you a thin kerf (thickness of cut) so you
don't waste a lot of precious material.
The blades will rust if left standing in water for an extended
period of time. If you choose to leave your blades in water over
night we recommend adding a rust inhibitor to your water. Blade
life can be extended with the use of a water based cutting oil.
We can also supply a saw blade bush to fit 1/2" , 5/8", 3/4" or 7/8
" with this blade. The bushings must be requested when you place
If the blade seems to slow down in cutting, you can take an old
corundum grinding wheel 100 or 80 grit, slice into this a few
times, and you once again have a clean smooth cutting blade. We
also stock aluminium oxide dressing sticks for sharpening these
blades and also for cleaning our diamond wheels.