Pharmaceutical 200L High Speed Mixer Granulator Machine Wet Mixer

pharmaceutical High Speed mixer granulator with sway granulator

General intoduction

Work principle

The powder raw material and adhesive are mixed to moisture soft material through mixing oar at the bottom of the cylinder (cone) container. Then cut it to become uniform damp granule through high speed crushing oar installed at the side.Finshed product is discharged by cylinder.

Features

1. pharmaceutical High Speed mixer granulator with sway granulatoradopts horizontal cylinder structure.Its structure is reasonable.

2. Use air filled seal shaft to drive. When washing, it can be changed to water.

3. Fluidized Granulation and the shape of granule is close to ball. Its flow is good.

4. Compared with the traditional process,25% of adhesive can be reduced and the drying time can be shorted.

5. The time of mixing in dry is 2 minutes and the time of granulating is 1~4 minutes. Compared with the traditional process.

6. In the same sealed container, dry mixing and granulating can be finished. It is in conformity with the requirements of GMP.

7. The whole operation has strict safe and protective measures.

Technical parameters