| Sign In | Join Free | My udpf.com |
|
| Sign In | Join Free | My udpf.com |
|
| Categories | Switch Life Tester |
|---|---|
| Brand Name: | Sinuo |
| Model Number: | SN2209 |
| Certification: | Calibration Certificate (Cost Additional) |
| Place of Origin: | China |
| MOQ: | 1 |
| Price: | Customized |
| Payment Terms: | L/C, , T/T, Western Union, MoneyGram |
| Supply Ability: | 100 sets per month |
| Delivery Time: | 10 Days |
| Packaging Details: | Cartob Box |
| Applied Standard: | YDT757 |
| Test Sample: | Microwave tower |
| Handle Material: | Oak |
| Hammer weight: | 70g |
| Hammer Mass: | 210g±1g |
| Hammer Material: | 45 steel |
| Hammer Hardness: | Above HS40 |
| Base Size: | 250×250×15mm |
| Company Info. |
| Sinuo Testing Equipment Co. , Limited |
| Verified Supplier |
| View Contact Details |
| Product List |
YDT757 Galvanized Coating Adhesion Hammer Drop Test Device
Product Overview:
This test device conforms to the YDT757 drop hammer test method, and is suitable for hot-dip galvanized coating adhesion test. It uses a hammer to drop freely to hit the sample to test whether the galvanized coating meets the standard. This product is suitable for product quality inspection and control of similar iron tower manufacturers and quality inspection departments.
Sample and Restriction:
Transmission line tower, microwave tower.
Application:
It is used to test hot dip galvanized coating adhesion.
Test Principle:
Drop freely impact samples of the hammer head to test galvanized Layer meets standards or not.
Usage Instructions:
Adjust the device according to the countertop level to make it
level, Adjust the sample so that the striking point is not less
than 10mm away from the edge, corner, and end of the sample, the
hammer head faces the center of the platform, the hammer handle is
perpendicular to the base plane, and then falls freely, striking 5
points in parallel at 4mm intervals. Check whether the surface
condition of the galvanized layer meets the requirements of the
standard.
Technical Parameters:
| Hammer weight | 210g±1g |
| Hammer material | 45steel, |
| Hammer hardness | Hardness above HS40 |
| Vertical height from center line of hammer head to base surface | 300mm±1mm |
| Hammer handle material | Oak |
| Hammer handle mass | 70g |
| Base plate | 250 ×250×15mm, equipped with horizontal level bubble |
|
IEC60335-2-24 φ75mm Sphere Test Probe with Nylon Handle
IEC60884-1 Switch Life Tester For Insulation Parts Thermal Resistance 20N Ball Pressure Test
Switches Intended for Self-ballasted Lamp Loads Automatic Breaking Capacity Test System
Resistive Inductive Capacitive Load Cabinet for Switches Plugs and Sockets Breaking Capacity Test
IEC60884-1 Switch Life Tester Plugs Sockets Switches Breaking Capacity Endurance Test
IEC60068-2-32 Switch Life Tester Plugs / Sockets Tumbling Barrel 5rpm 500mm Free Fall Test
DIN VDE 0620-1:2010 Plug Socket Gauges Die Steel High Accuracy
IEC 60068-2-75 Switch Life Tester Low Energy Pendulum Hammer Impact Resistance Test Apparatus
16A Switch Life Tester IEC 60884-1 Power Cords Automatic Flexing Test Equipment With Safety Cover Mitsubishi PLC
IEC 60884-1 Figure 8 Compression Resistance Performance Tester For Plug 300N Single Working Station
