10rpm-600rpm Low Speed Cutting Machine , Metallography Specimen Cutter CE Qualified

DS600 Low Speed 10-600rpm Precision Cutting Machine Specimen Cutter CE Qualified

Technical Data Download: iqualitrol Low Speed Cutting Machine DS600

Brief Introduction:

DS600 Low Speed cutting machine is a precision sectioning saw that is designed forcutting various types of materials with minimal deformation. This low speed precision cutter is targetedfor delicate parts by only using gravity fed force.

iqualitrol DS600 low-speed precision cutter is applicable to accurate cutting of hard materials, especially to high-value fragile artificial crystal.

There are four kinds of fixtures, so the processed workpiece can be cut at the optimal angle. It comes with a limit switch, can work without a watchman.

The spindle has high accuracy of operation, the horizontal feed position of the processed workpiece can slightly be adjusted, and the machine can be power-off automatically after cutting is finished.

Technical Specification:

Specimen Cutting:

When cutting a specimen from a larger piece of material, care must be taken to ensure that it is representative of the features found in the larger sample, or that it contains all the information required to investigate a feature of interest.

One problem is that preparation of the specimen may change the microstructure of the material, for example through heating, chemical attack, or mechanical damage. The amount of damage depends on the method by which the specimen is cut and the material itself.

Cutting with abrasives may cause a high amount of damage, while the use of a low-speed diamond saw can lessen the problems. There are many different cutting methods, although some are used only for specific specimen types. iqualitrol provides the DS600 low speed diamond saw for cutting OM (optical microscope), SEM (scanning electron microscope), and even TEM (transmission electron microscope) specimen.

iqualitrol is a professional company to supply quality control instrument and repair service. The main products are industrial video borescope, hardness testers, metallographical instrument, metallurgical microscopes, temperature test chambers, etc.

These are widely used in machinery, mold, metal, rubber, connectors, household appliances, printed circuit boards, medical equipment, and so on.

Our sales and service staff are well trained and experienced. They can give professional advice to customers and recommend suitable equipment according to specific requirement.