Full automatic clay brick making project Tunnel kiln design and related operation equipment systems

Full automatic clay brick making project Tunnel kiln design and related operation equipment systems

Full automatic clay brick tunnel kiln project

Sintering bricks are produced by using clays as raw materials and adopting two-time setting and baking processes, that is Semi-stiff plastic extruding process; drying in the tunnel drying chamber using single layer process and baking in the tunnel kiln with natural gas.
Main equipments are plate feeder, primary roller crusher, fine pulverizing grinder, double shaft mixer, reversible belt conveyor, multi-buckets excavator, mixing and extruder, double stage vacuum extruding machine, automatic loading and unloading system, tunnel drying chamber, robot hand, tunnel kiln, de-hacking machine.

Technical point
Considering raw material's character according to our long period experience, any project must meet follow technical requirement:
1.The material should fully mix when processing, thus to ensure the molding of the green brick and drying uniformity.
2.The clay material should be fine treated, the biggest particles should be less than 2mm or so.
3.Molding moisture content must controls under 18%, strictly control the section before critical point when drying and drying cycle is not less than 36 hours.

Tunnel kiln can adopt coal /gas/oil as fuel for firing clay bricks.

We offer automated combustion systems for different types of fuels.

Brick tunnel kiln of technical parameters:

Under construction auto red clay brick tunnel kiln project in Customer's factory

We also have other complete sets of automated clay brick making production line equipment to recommend to you:

BBT supply following clay brick production line machinery and equipment :

TCNL series of Chain full steel type box feeder

TWGD series of double shaft mixer

GS series of roller crusher

TRA series of double tooth roller crusher

TWJH series of front grid extruding mixer

TWPM series of wet pan mill

QTQG series of cutter

EV series of vacuum extruder

Robot setting machine

Brick machine spare parts

BBT provide full automatic clay brick making project of dryer chamber /brick kiln design, construction and technical supporting.

BBT focuses on the core business development by concentrating on the professionalization strategy. We devote ourselves to integrating technical solutions of production line process design, thermal design, equipment R&D, trade,mechanical and electrical equipment installation, international engineering, project consultancy, technical service for producing sintered wall materials of fired perforated brick, paving block, facing brick, hollow block, insulating block, wall board.

BBT takes the market demand as guidance, creates the value for the customer as objective and sincerely provides:

1. Process design of directing setting, two times setting and firing technology(BBT masters core technology);

2. Wall boards production process technology;

3. Prefabricated walls production process technology;

4. Key equipment in raw materials treatment process: wet pan mill, high speed fine-pulverized roller;

5. Key equipment in molding process: extruding type mixer and filter mixer;

6. Equipment R&D and manufacturing of fully automatic cutting, marshalling, brick stacking, loading and unloading;

7. Equipment R&D and manufacturing of thermal running, thermal monitor and control system;

8. All types of fuel combustion and control systems;

9. Management services of brick & tile production technology.

With the love of brick, BBT will continue to take unremitting efforts to provide our clients with high standard brick making production line through continuous innovation and strict industrial chain development and management.