STM8S103F3P6TR Access line 8 Kbytes Flash data EEPROM 10-bit ADC 3 timers

STM8S103F3P6TR Access line 8 Kbytes Flash, data EEPROM,10-bit ADC, 3 timers

Features

Core

16 MHz advanced STM8 core with Harvard architecture and 3-stage pipeline

Extended instruction set Memories

Program memory:8 Kbytes Flash;dataretention 20 years at 55 °C after 10 kcycles

Data memory: 640 bytes true data EEPROM; endurance 300 kcycles

RAM: 1 Kbytes Clock, reset and supply management

2.95 to 5.5 V operating voltage

Flexible clock control, 4 master clock sources: - Low power crystal resonator oscillator - External clock input - Internal, user-trimmable 16 MHz RC - Internal low power 128 kHz RC

Clock security system with clock monitor

Power management: - Low power modes (wait, active-halt, halt) - Switch-off peripheral clocks individually

Permanentlyactive, low consumptionpower-on and power-down reset

Interrupt management

Nested interrupt controller with 32 interrupts

Up to 27 external interrupts on 6 vectors

Timers

Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

16-bit general purpose timer, with 3 CAPCOM channels (IC, OC or PWM)

8-bit basic timer with 8-bit prescaler

Auto wake-up timer

Window watchdog and independent watchdog timers

Communications interfaces

UART with clock output for synchronous operation, Smartcard, IrDA, LIN master mode

SPI interface up to 8 Mbit/s

I 2C interface up to 400 Kbit/s

Analog to digital converter (ADC)

10-bit, ±1 LSB ADC with up to 5 multiplexed channels, scan mode and analog watchdog

I/Os

Up to 28 I/Os on a 32-pin package including 21 high sink outputs

Highly robust I/O design, immuneagainst current injection

Development support - Embedded single wire interface module (SWIM) for fast on-chip programming and non intrusive debugging

Unique ID

96-bit unique key for each device

1 Introduction

Thisdatasheet contains thedescriptionof thedevicefeatures,pinout,electrical characteristics, mechanical data and ordering information. • For completeinformationonthe STM8S microcontroller memory, registersandperipherals, please refer to the STM8S microcontroller family reference manual (RM0016). • For information on programming, erasing and protection of the internal Flash memory please refer to the STM8S Flash programming manual (PM0051). • For information on the debug and SWIM (single wire interface module) refer to the STM8 SWIM communication protocol and debug module user manual (UM0470). • For information on the STM8 core, please refer to the STM8 CPU programming manual (PM0044).

2 Description

The STM8S103x access line 8-bit microcontrollers offer 8 Kbytes Flash program memory, plus integrated true data EEPROM. The STM8S microcontroller family reference manual (RM0016) refers to devices in this family as low-density. They provide the following benefits: • Reduced system cost - Integrated true data EEPROM for up to 300 k write/erase cycles - High system integration level with internal clock oscillators, watchdog and brown-out reset. • Performance and robustness - 16 MHz CPU clock frequency - Robust I/O, independent watchdogs with separate clock source - Clock security system • Full documentation and a wide choice of development tools • Advanced core and peripherals made in a state-of-the art technology

Table 1: STM8S103xx access line features

4 Product overview

Thefollowingsectionintends togiveanoverview of thebasic featuresof thedevicefunctional modules and peripherals. For more detailed information please refer to the corresponding family reference manual (RM0016).

4.1 Central processing unit STM8

The 8-bit STM8 core is designed for code efficiency and performance. It contains 6 internal registers which are directly addressable in each execution context, 20 addressing modes including indexed indirect and relative addressing and 80 instructions.

Architecture and registers

Harvard architecture

3-stage pipeline

32-bit wide program memory bus - single cycle fetching for most instructions

X and Y 16-bit index registers - enabling indexed addressing modes with or without offset and read-modify-write type data manipulations

8-bit accumulator

24-bit program counter - 16-Mbyte linear memory space

16-bit stack pointer - access to a 64 K-level stack

8-bit condition code register - 7 condition flags for the result of the last instruction

Addressing

20 addressing modes

Indexed indirect addressing mode for look-up tables located anywhere in the address space

Stack pointer relative addressing mode for local variables and parameter passing

Instruction set

80 instructions with 2-byte average instruction size

Standard data movement and logic/arithmetic functions

8-bit by 8-bit multiplication

16-bit by 8-bit and 16-bit by 16-bit division

Bit manipulation

Data transfer between stack and accumulator (push/pop) with direct stack access

Data transfer using the X and Y registers or direct memory-to-memory transfers

4.2 Single wire interface module (SWIM) and debug module (DM)

The single wire interface module and debug module permits non-intrusive, real-time in-circuit debugging and fast memory programming.

Hot selling offer!!!

CHONGMING GROUP (HK) INT'L CO., LTD. located in Hong Kong and Shenzhen. We are an independent Distributor of Electronic Components,established in 2008. AS a growing fast company, CM GROUP is renowned for its world-class efficiency, excellent services, and extraordinary ability to supply electronic components that are hard to find and even obsolete. We have taken pride in our innovation, reliability and service, especially in the semiconductor marketplace.
Our distribution brands include XILINX，ALTERA，ATMEL, INFINEON, ST,SAMSUNG，TEXAS INSTRUMENTS，ON，TOSHIBA，，MICROCHIP，CYPRESS，FREESCALE，etc. We distributes over 200,000 products ranging from semiconductors to resistors, capacitors, diodes, inductors, connectors, transistors, sensors and so on.
Our mission is to meet and exceed all the expecations of what we supply to customers.