Industrial Waste Water Treatment MBR Membrane Bioreactor With PVDF Membrane Material

FS Membrane bioreactor for waste water treatment in soybean paste factory 150 m3/day

MBR introduction

The membrane bioractor are widely used in effluent and sewage treatment plant. It can purify domestic and industrial wastewater by combining the action of microorganisms with the separation of solids from liquids using membranes. The membrane removes suspended solids and pathogenic e-coli bacteria, so that the effluent water can be re-used as toilet flushing water or sprinkling water

The MBR membrane bioreactor removes not only suspended solids (SS) but also substances difficult to biodegrade such as detergent, by taking advantage of its longer Sludge Retention Time (SRT). This enables the treated water to be re-used.

Specifications

Above datas are tested at standard single sheet FS MBR with municipal waste water at 25 ℃ and operation pressure 10Kpa.

Key features

• The excellent chemical stability, fouling resistance and mechanical strength
• The pore size is less than 0.1 micron, the improved effective membrane area ensures large permeate flux and quality
• The perfect fouling resistance due to the asymmetric structure. This features low membrane resistance, good fouling resistance. large particles from rosion of air, won't enter into the membrane. The small particles through the membrane, won't be stranded in the membrane pore and quickly flow through the large hole out of the membrane
• The FS MBR can be with higher concentration of activated sludge (MLSS is larger than 8000 mg / L). Mebrane surface area doesn't plot the mude and no lose of effective membrane area. Air and water erosion on the membrane surface remove the membrane surface dirty
• The FS membrane is firmly welded on high-intensity support plate, it does not appear the phenomenon of broken wires as hollow fiber so permeate water quality stable. This is very important for the waste water treatment application followed by NF / RO membrane recycle process.

Asymmetric structure for fouling resistance

Asymmetric structure Symmetric structure

Comparison between flat sheet membrane and hollow fiber membrane

Easily clean and membrane replacement

Specifications of modular

<

Dimensions

Applications

Emulsified oil waste water Hospital waste water Scenic spot sewage

landfill leachate wafter grinding waste water woolen waste water

dairy, food & beverage pharmaceutical heat sanitizable

whey plants concentration WPI plants Gelatine

Sugar

Focus on low-carbon energy and environment protection technology, we design and manufacture fluid processing and control products to give our contribution to the sustainable energy develop.

Lots of mega projects have been installed with our products, Shanghai expo center, Shanghai Disney energy center, Beijing Z15 tower, Malaysia GDC energy station, etc. Our technology and practical application experience, allow us to provide our client with products and solutions which meet your expectation on building, improving and mainting equipment. The industries we served:

• New energy
• Petroleum and chemical
• Industrial energy
• Oil and gas
• Metals and mining
• Pulp and paper
• Water and waste water treatment
• Marine
• Power
• Refining
• Food and beverage
• Life sciences

Our R&D, customer experience and manufacturing center is located in the “Low energy building science center” Hanghzou, China. As a Provincial class Postdoctoral workstation by collaboration with China State Energy research institute, which ensure our advantage from technician, science research & development, equipment. Our main products includes: flowmeters, roots air blower, pump, as well as design consultancy on RO, UF, NF design.