E1,100M,1000M,V.35,V.24,RS232,RS422,RS485 hotline multi-service PDH Mux with LCD SNMP Console network management

E1,100M,1000M,V.35,V.24,RS232,RS422,RS485 hotline multi-service PDH Mux

with LCD SNMP Console network management

Overview

FC-PDHM series PDH is modular structure point-to-point optical transmission equipment with LCD display, uses the FPGA chips and easy to upgrade. The Main board provide 4*100M channel Ethernet data and 2 AUX port which is for transmitting other data such as RS232/RS485/RS422, two optical interface for optional 1+1 auto protection switch (APS).
4 slots of tributary with variant plug-in modules which included 4xE1 channels module, 4/8/16 x FXO/FXS module and 2x Nx64K V.35 module.The maximum capacity will be up 4 plug-in modules which could be combinations with above modules.The high flexibility, performance, is the best solution for voice/data/video services in existed market.

Features

• Provides total 16 E1 transparent transmission capacity ;
• With char 16*2 LCD display and SNMP agent inside.
• Provide Console manage interface(RS232)
• Provice one hotline channel for option;
• Provide two SFP fiber interfaces, one as master, the other as slave, insuring uninterrupted service transmission.
• The rate of optical port is 155Mbps, transmission range can reach 25KM, 40KM, 60KM, 80KM or 100KM;
• Provide two fiber interface 1+1 protect(APS)function ,and ALS(Automatic Laser Shutdown/Reduction)function
  • Provide 4 slots plug-in modules:
  • 4×unFramed E1 module(75Ω)/(120Ω)
  • 4×Framed E1 module(75Ω)/(120Ω),any timesolts can be set
  • 4×FXO/FXS/EM2-4/Magnet telephone module
  • 8×FXO/FXS/2 line audio/Magnet telephone module
  • 16×FXO/FXS/2 line audio/Magnet telephone module
  • 2×V.35 (2.048M Fixed speed) module
  • 2×V.35 (N*64K N=1-32) module
  • 4×RS232/422/485 module
• 4*FE to E1 bridge(wire speed 2.048M) module
• Provide 4FE(wire speed 100M)Ethernet channel, support mutual negatiate, Ethernet bandwidth is set on base on multiple of 32K.;
• Ethernet port supports full/half duplex, 10M/100M auto-ataptable;
• Ethernet port supports VLAN function and has 4 devision mode for user selection;
• Ethernet package size support 1916 byte and 4 Ethernet port could be set seperately;
• Has complete alarm function and can monitor remote device status;
• Supports E1 loop from remote so as to detect and manage device conveniently;
• The combination AC220V and DC-48V for redundant

Parameters

Fiber

Multi-mode Fiber

50/125um, 62.5/125um,

Maximum transmission distance: 5Km @ 62.5 / 125um single mode fiber,attenuation (3dbm/km)

Wave Length: 820nm

Transmitting power: -12dBm (Min) ~-9dBm (Max)

Receiver sensitivity: -28dBm (Min)

Link budget: 16dBm

Single-mode Fiber

8/125um, 9/125um

Maximum transmission distance: 40Km

Transmission distance: 40Km @ 9 / 125um single mode fiber, attenuation (0.35dbm/km)

Wave Length: 1310nm

Transmitting power: -9dBm (Min) ~-8dBm (Max)

Receiver sensitivity: -27dBm (Min)

Link budget: 18dBm

E1 Interface

Interface Standard: comply with protocol G.703;
Interface Rate: n*64Kbps±50ppm;
Interface Code: HDB3;

E1 Impedance: 75Ω (unbalance), 120Ω (balance);

Jitter tolerance: In accord with protocol G.742 and G.823

Allowed Attenuation: 0~6dBm

Ethernet interface(10/100M)

Interface rate: 10/100 Mbps, half/full duplex auto-negotiation

Interface Standard: Compatible with IEEE 802.3, IEEE 802.1Q (VLAN)

MAC Address Capability: 4096

Connector: RJ45, support Auto-MDIX

FXS Phone Interface

Ring voltage: 75V

Ring frequency: 25HZ

Two-line Impedance: 600 Ohm (pick up)
Return loss: 40 dB

FXO Switch Interface

Ring detect voltage: 35V

Ring detection frequency: 17HZ-60HZ

Two-line Impedance: 600 Ohm (pick up)

Return loss: 40 dB

EM 2/4 Line

AD: 0dB

DA: -3.5dB

Two/Four-line Impedance: 600 Ohm

Return loss: 20 dB

Working environment

Working temperature: -10°C ~ 50°C

Working Humidity: 5%~95 % (no condensation)

Storage temperature: -40°C ~ 80°C

Storage Humidity: 5%~95 % (no condensation)

Network Application

Fibre Easy Communication Service Limited

8+ Years of Manufacturing Quality Products in the Mainland

OVERVIEW

Founded in 2008,Fibreasy designs and manufacutes Ethernet,Voice and Data communications products for fiber optic networks.

WHY CHOOSE US

384 lines telephone optical multiplexer

Modular multi-sevice PDH multiplexer

64 PON port WDM Combiner

1550nm external modulation optical transmitter