| Sign In | Join Free | My udpf.com |
|
| Sign In | Join Free | My udpf.com |
|
| Categories | Small Meter |
|---|---|
| Brand Name: | Lonroy |
| Place of Origin: | China |
| MOQ: | 1 |
| Hammer weight: | 210g±1g |
| Hammer material: | 45 steel |
| Hardness level: | HS40 or above |
| Vertical height: | 300mm±1mm |
| Hammer handle material: | Oak |
| Base plate dimensions: | 250x250x15mm |
| Base plate feature: | Horizontal bubble |
| Strike interval: | 4mm |
| Minimum strike distance: | 10mm from edges |
| Protection class: | IP65 |
| Voltage: | 220 V |
| Test standard: | GB/T2694-2010, YDT757 |
| Strike points: | 5 parallel points |
| Hammer orientation: | Perpendicular to base |
| Test method: | Free fall hammer |
| Certification: | ISO ASTM CE |
| Price: | Negotaible |
| Packaging Details: | Wooden package |
| Delivery Time: | 5-8 work days |
| Payment Terms: | L/C,D/A,D/P,T/T,Western Union |
| Supply Ability: | 200 |
| Company Info. |
| DONGGUAN LONROY EQUIPMENT CO LTD |
| Verified Supplier |
| View Contact Details |
| Product List |
Galvanized Layer Hammer Adhesion Testing Machine Zinc Coating Adhesion Hammering Tester
Introduction
1.The test device conforms to the drop hammer test method of GB/T2694-2010 and YDT757 standards, and is suitable for the adhesion test of hot dip galvanized layer, which uses the hammer head free drop to test whether the galvanized layer meets the standard. This product is suitable for product quality inspection and control by similar manufacturers and quality inspection departments of iron towers.
2, galvanized layer adhesion hammer test device use method
Adjust the device according to the table level so that it is
horizontal, adjust the sample so that the striking point is not
less than 10mm from the side, Angle and end of the sample, the
hammer head faces the center of the bench, the hammer handle is
perpendicular to the base plane and then falls freely, and the 5
points are struck parallel at an interval of 4mm. Check whether the
surface state of the galvanized layer meets the standard
requirements, and the strike shall not be repeated
3.maintenance and maintenance
The whole unit has been treated to prevent rust, dust and moisture.
Keep the end face of the support smooth and smooth.
Galvanized Layer Hammer Adhesion Testing Machine Zinc Coating Adhesion Hammering Tester
Technical specification
Hammer weight | 210g±1g, 45 steel, hardened to HS40 or above |
Vertical height from center line of hammer head to base surface | 300mm±1mm |
Hammer handle material | Oak |
The bottom plate is 250x250x15mm and is configured with a horizontal bubble. The level can be adjusted | |
|
IEC 60335 IEC 60065 50N Test Finger Laboratory Probe Finger IEC 61032 Experimental Finger
IEC 60068 IK Vertical Drop Hammer Testing Device Vertical Falling Weight Test Machine
IEC 60068 0.14J Single Impact Hammer
IEC 60068 6 Grade Spring Impact Hammer Electrical Spring Actuated Impact Hammer Factory Price
0.7J Spring Impact Hammer test Device IEC60068
IEC 60068 0.2J Spring Impact Hammer
DM5200 Intelligent χ-γ Radiation Meter Smart X Radiation Meter
IEC 60335 125mm Standard Test Finger IEC 61032 Test Bending Finger Standard Bent Test Finger
Q61 Concrete Strength Tester,Ultrasonic Concrete Rebound Hammer
IEC 60068 Spring Impact Hammer Calibrating Equipment Calibration Device Spring Impact Hammer Calibrator
